4-CHANNEL AMPLIFIER/6 PREAMPLIFIED OUTPUTS WITH INTEGRATED DSP AND WIRELESS RECEPTION
Technical details
• Power (4 Ω): 4 x 75 Watts RMS
• Power (2 Ω): 4 x 120 Watts RMS
• 4 high-level inputs
• 2 low-level RCA inputs
• 6 low-level RCA outputs
• Frequency response: 22 Hz – 20 kHz
• Distortion: 0.1%
• Signal-to-noise ratio: 95 dB
• Standby current: << 0.4 mA
• Maximum current consumption: 30 A
• Dimensions (L x W x H): 160 × 146 × 46 mm – 6.3’’ × 5.7’’ × 1.8’’
DSP Features
• Control of DSP settings via the smartphone app connected via BT
• Adjustable time alignment from 0 to 20 ms for each speaker and phase adjustment
• 15-band independent parametric and graphic equalizer for the 6 output channels
• Fully configurable filter from 6 to 48 dB/octave (Linkwitz, Riley, Butterworth & Bessel) on all outputs
• 8 storable preset settings in the amplifier
• 6 RCA outputs for connecting additional amplifiers (configurable to drive subwoofers)
• Input noise reduction processing
Accessories included:
Instruction manual
Audio streaming with the included BT receiver
Optional remote control
Optional Plug & Play cable for installation in all vehicles without cutting the original wiring harness
Looking for Blam audio products?
Find our resellers and distributors
around the world.
4-CHANNEL AMPLIFIER/6 PREAMPLIFIED OUTPUTS WITH INTEGRATED DSP AND WIRELESS RECEPTION
Technical details
• Power (4 Ω): 4 x 75 Watts RMS
• Power (2 Ω): 4 x 120 Watts RMS
• 4 high-level inputs
• 2 low-level RCA inputs
• 6 low-level RCA outputs
• Frequency response: 22 Hz – 20 kHz
• Distortion: 0.1%
• Signal-to-noise ratio: 95 dB
• Standby current: << 0.4 mA
• Maximum current consumption: 30 A
• Dimensions (L x W x H): 160 × 146 × 46 mm – 6.3’’ × 5.7’’ × 1.8’’
DSP Features
• Control of DSP settings via the smartphone app connected via BT
• Adjustable time alignment from 0 to 20 ms for each speaker and phase adjustment
• 15-band independent parametric and graphic equalizer for the 6 output channels
• Fully configurable filter from 6 to 48 dB/octave (Linkwitz, Riley, Butterworth & Bessel) on all outputs
• 8 storable preset settings in the amplifier
• 6 RCA outputs for connecting additional amplifiers (configurable to drive subwoofers)
• Input noise reduction processing
Accessories included:
Instruction manual
Audio streaming with the included BT receiver
Optional remote control
Optional Plug & Play cable for installation in all vehicles without cutting the original wiring harness
| GAMME | |
|---|---|
| TYPE | |
| PRODUIT |
You will like also :
-
CAR AUDIO KIT MB 165.2
Multix Barrel -
WOOFER S 6.80
Signature -
Tweeter TSM 25 MG70 HR
Multix
