DSP Amplifier 6.120

DSP Amplifier 6.120

DSP 6.120 is a powerful 6-channel amplifier with integrated DSP, designed for optimal audio performance. It features 6 high-level inputs, 2 RCA inputs, and 8 pre-amplified RCA outputs. Audio processing is done via a Bluetooth application, with 15-band EQ, time alignment, advanced filters, and customizable profiles. Bridged channels for subwoofer and Plug & Play installation option without modifying the original wiring.

VIEW DISTRIBUTORS

6.120 6-channel DSP amplifier, 6 high-level inputs, 8 pre-amplified outputs with integrated DSP and wireless reception

 

Technical data

  • Maximum power: 6 x 150 Watts
  • Power (4 Ohm): 6 x 75 Watts RMS
  • Power (2 Ohm): 6 x 120 Watts RMS
  • Channels 5 and 6 bridged to power a subwoofer: Power (4 ohm) 200 Watts RMS
  • 6 high-level inputs
  • 2 low level RCA inputs
  • 8 RCA low level outputs
  • Frequency response: 20 Hz – 20 kHz
  • Distortion: 0.1%
  • Signal-to-noise ratio: 100 dB
  • Standby current < 0.4 mA
  • Maximum current consumption 30 A
  • Dimensions: 286 x 175 x 51 mm

 

DSP Features

  • Control DSP settings via Bluetooth-connected smartphone app
  • Audio streaming with the included Bluetooth receiver
  • Adjustable time alignment from 0 to 20 ms for each speaker and phase adjustment
  • 15-band independent parametric and graphic equalizer for the 8 output channels
  • Fully adjustable 6-48 dB/octave Linkwitz, Riley, Butterworth & Bessel filter on all outputs
  • 8 favorite settings that can be stored in the amplifier
  • 8 RCA outputs for connecting additional amplifiers (configurable to drive subwoofers)
  • Input noise attenuation treatment

 

Supplied accessories

  • Remote control
  • User manual
  • USB cable for computer

 

Optional accessory

  • Optional Plug & Play cable for installation in all vehicles without cutting the original wiring harness – optional

Looking for Blam audio products?
Find our resellers and distributors around the world.

Installers
Distributors

6.120 6-channel DSP amplifier, 6 high-level inputs, 8 pre-amplified outputs with integrated DSP and wireless reception

 

Technical data

  • Maximum power: 6 x 150 Watts
  • Power (4 Ohm): 6 x 75 Watts RMS
  • Power (2 Ohm): 6 x 120 Watts RMS
  • Channels 5 and 6 bridged to power a subwoofer: Power (4 ohm) 200 Watts RMS
  • 6 high-level inputs
  • 2 low level RCA inputs
  • 8 RCA low level outputs
  • Frequency response: 20 Hz – 20 kHz
  • Distortion: 0.1%
  • Signal-to-noise ratio: 100 dB
  • Standby current < 0.4 mA
  • Maximum current consumption 30 A
  • Dimensions: 286 x 175 x 51 mm

 

DSP Features

  • Control DSP settings via Bluetooth-connected smartphone app
  • Audio streaming with the included Bluetooth receiver
  • Adjustable time alignment from 0 to 20 ms for each speaker and phase adjustment
  • 15-band independent parametric and graphic equalizer for the 8 output channels
  • Fully adjustable 6-48 dB/octave Linkwitz, Riley, Butterworth & Bessel filter on all outputs
  • 8 favorite settings that can be stored in the amplifier
  • 8 RCA outputs for connecting additional amplifiers (configurable to drive subwoofers)
  • Input noise attenuation treatment

 

Supplied accessories

  • Remote control
  • User manual
  • USB cable for computer

 

Optional accessory

  • Optional Plug & Play cable for installation in all vehicles without cutting the original wiring harness – optional
PRODUIT

Amplifier

You will like also :

This site is available in :