LA 4100 amplifier

The 100W x 4-channel Class AB Pure SQ amplifier was designed with meticulous attention to every detail. It offers exceptional power reserves, allowing for natural and accurate music reproduction. Bass and sub-bass frequencies are reproduced with power and fidelity.

Thanks to its large size, this amplifier ensures optimal cooling, increased stability, and impressive performance. Its understated and robust design, as well as its high-end finishes, are available in two colors: black and silver.

In terms of technical specifications, the amplifier offers an RMS power output of 4 x 100 W into 4 Ω and 4 x 130 W into 2 Ω. In bridged mode, it delivers an RMS power of 2 x 260 W into 4 Ω. It is equipped with adjustable low-pass and high-pass filters, as well as a bass boost ranging from 0 to 10 dB at 45 Hz.

The amplifier also offers remote subwoofer level control, a signal-to-noise ratio greater than 90 dB, and multiple protections against short circuits, low impedance, reverse polarity, and overheating. The dimensions are 416 mm x 217 mm x 60 mm.

It is available in a Black edition version, and the remote control is optional.

100 W X 4 CHANNEL CLASS AB PURE SQ AMPLIFIER

 

Technical details

We have developed the LIVE amplifiers taking into account all the parameters. We listened and compared each component until we reached our goals.

The result is a monumental reserve of energy that reproduce a natural music in its smallest details. The bass and extreme bass are faithfully reproduced with impressive strength.

Due to their large volume, they have a large dissipation surface which ensures their cooling, stability and performance. They benefit from a sober and robust design, high quality finish and are available in two colors, black and silver.

 

Composition

– Low level RCA input: 0.5 V
– RMS power (4 Ω) : 4 x 100 W
– RMS power (2 Ω) : 4 x 130 W
– Bridge power RMS (4 Ω) : 2 x 260 W
– Low pass crossover: 50 Hz – 3 kHz (12 dB/octave) Rear
– High pass crossover: 50 Hz – 3 kHz (12 dB/octave) (Front),
15 Hz – 500 Hz (12 dB/octave) (Rear)
– Frequency response: 10 Hz – 45 kHz
– Bass boost: 0-10 dB at 45 Hz (Rear)
• Signal to noise ratio > 90 dB
– Remote subwoofer level control: 0 – 10 dB (Rear)
– Mono/stereo selection (Rear)
– Protections: short circuit / low impedance / reverse polarity / thermal protection
– Dimensions (L x W x H): 416 mm x 217 mm x 60 mm – 16,3” x 8,5” x 2,4

 

This amplifier is also available in a Black edition.
The remote control is optional.

 

Looking for Blam audio products?
Find our resellers and distributors around the world.

100 W X 4 CHANNEL CLASS AB PURE SQ AMPLIFIER

 

Technical details

We have developed the LIVE amplifiers taking into account all the parameters. We listened and compared each component until we reached our goals.

The result is a monumental reserve of energy that reproduce a natural music in its smallest details. The bass and extreme bass are faithfully reproduced with impressive strength.

Due to their large volume, they have a large dissipation surface which ensures their cooling, stability and performance. They benefit from a sober and robust design, high quality finish and are available in two colors, black and silver.

 

Composition

– Low level RCA input: 0.5 V
– RMS power (4 Ω) : 4 x 100 W
– RMS power (2 Ω) : 4 x 130 W
– Bridge power RMS (4 Ω) : 2 x 260 W
– Low pass crossover: 50 Hz – 3 kHz (12 dB/octave) Rear
– High pass crossover: 50 Hz – 3 kHz (12 dB/octave) (Front),
15 Hz – 500 Hz (12 dB/octave) (Rear)
– Frequency response: 10 Hz – 45 kHz
– Bass boost: 0-10 dB at 45 Hz (Rear)
• Signal to noise ratio > 90 dB
– Remote subwoofer level control: 0 – 10 dB (Rear)
– Mono/stereo selection (Rear)
– Protections: short circuit / low impedance / reverse polarity / thermal protection
– Dimensions (L x W x H): 416 mm x 217 mm x 60 mm – 16,3” x 8,5” x 2,4

 

This amplifier is also available in a Black edition.
The remote control is optional.

 

GAMME

PRODUIT

TYPE

You will like also :