Kit L165P – Power

The BLAM L165P POWER kit is ideal for fans of rock and electronic music. Designed to deliver deep bass and powerful sound, it offers an immersive audio experience. The high-performance system includes two 165mm woofers and two 25mm soft dome tweeters, with audiophile-grade low-pass and high-pass filters, suitable for bi-amplification.

With a maximum power output of 180W and a frequency response of 50 Hz to 25 kHz, it delivers powerful yet controlled sound. Accessories included: mounting screws, tweeter mounting hardware, and instruction manual.

2-WAY SEPARATE LOUDSPEAKER SYSTEM

For those seeking the satisfaction of a speaker system with visceral impact and dynamics, the new BLAM L165P is for you.
Indeed, as its name indicates, the L165P POWER has been specially designed for those who want to fully enjoy their favorite rock or electro tracks.
Combined with a powerful amplifier, you will get a high sound level with deep but still well controlled bass that will allow you to relive the emotions of your favorite concerts.

Like all BLAM products, this line will allow you to access our “French Sound”, which not only enhances melodies and basses but also vocal melodies.

Technical details

This kit includes two 165 mm (6.5″) woofers, two 25 mm (1″) soft-dome tweeters, two 12db/octave audiophile low-pass filters and two 12dB/octave audiophile high-pass filters, suitable for bi-amplification.

High efficiency system 2 separate ways
165 mm woofer
Maximum power 180 W – Nominal power 90 W
Frequency response 50 Hz – 25 kHz
Sensitivity 91.5 dB – Impedance 3 Ω

 

Available in 2 versions:

L165P (complete kit with filters)
L165P Active (without filter)

 

Composition

L165P WOOFER HIGH POWER
Woofer 165 mm (6.5″)
Maximum power 180 W / Nominal power 90 W
Frequency response 50 Hz – 8 kHz
Sensitivity 91.7 dB – Impedance 3 Ω
Machined aluminium basket – Epoxy resin and fiberglass membrane – Butyl surround – “Conex” long life spider – 32 mm voice coil on Kapton former – 85 mm x 20 mm magnetic motor – 5 mm thick magnetic circuit

 

LT25 HIGH-QUALITY TWEETER
High-quality 25 mm soft dome tweeter
Maximum power 100 W – Nominal power 15 W
Frequency response 2.5 kHz – 25 kHz
Sensitivity 91.6 dB – Impedance 3 Ω
High efficiency neodymium motor N38

 

BFW02 FILTRE HIGH QUALITY
Low pass 12 dB/octave
Cut-off frequency 4 kHz

 

BFT02 FILTRE HIGH QUALITY
12 dB/octave high-pass
Tweeter level adjustable to +3 dB, 0 dB or attenuated to -3 dB
Cut-off frequency: 3.5 kHz

 

Supplied accessories :
Mounting screws
Mounting accessories for tweeters
Operating instructions

 

Looking for Blam audio products?
Find our resellers and distributors around the world.

2-WAY SEPARATE LOUDSPEAKER SYSTEM

For those seeking the satisfaction of a speaker system with visceral impact and dynamics, the new BLAM L165P is for you.
Indeed, as its name indicates, the L165P POWER has been specially designed for those who want to fully enjoy their favorite rock or electro tracks.
Combined with a powerful amplifier, you will get a high sound level with deep but still well controlled bass that will allow you to relive the emotions of your favorite concerts.

Like all BLAM products, this line will allow you to access our “French Sound”, which not only enhances melodies and basses but also vocal melodies.

Technical details

This kit includes two 165 mm (6.5″) woofers, two 25 mm (1″) soft-dome tweeters, two 12db/octave audiophile low-pass filters and two 12dB/octave audiophile high-pass filters, suitable for bi-amplification.

High efficiency system 2 separate ways
165 mm woofer
Maximum power 180 W – Nominal power 90 W
Frequency response 50 Hz – 25 kHz
Sensitivity 91.5 dB – Impedance 3 Ω

 

Available in 2 versions:

L165P (complete kit with filters)
L165P Active (without filter)

 

Composition

L165P WOOFER HIGH POWER
Woofer 165 mm (6.5″)
Maximum power 180 W / Nominal power 90 W
Frequency response 50 Hz – 8 kHz
Sensitivity 91.7 dB – Impedance 3 Ω
Machined aluminium basket – Epoxy resin and fiberglass membrane – Butyl surround – “Conex” long life spider – 32 mm voice coil on Kapton former – 85 mm x 20 mm magnetic motor – 5 mm thick magnetic circuit

 

LT25 HIGH-QUALITY TWEETER
High-quality 25 mm soft dome tweeter
Maximum power 100 W – Nominal power 15 W
Frequency response 2.5 kHz – 25 kHz
Sensitivity 91.6 dB – Impedance 3 Ω
High efficiency neodymium motor N38

 

BFW02 FILTRE HIGH QUALITY
Low pass 12 dB/octave
Cut-off frequency 4 kHz

 

BFT02 FILTRE HIGH QUALITY
12 dB/octave high-pass
Tweeter level adjustable to +3 dB, 0 dB or attenuated to -3 dB
Cut-off frequency: 3.5 kHz

 

Supplied accessories :
Mounting screws
Mounting accessories for tweeters
Operating instructions

 

GAMME

TYPE

TAILLE

PRODUIT

You will like also :