Designed to fit easily into any environment, even the smallest, the Side wall-mounted speaker makes no compromises. Equipped with a 165 mm (6.5″) woofer and a 30 mm (1.1/4″) horn tweeter, it delivers crisp bass down to 60 Hz, making it the perfect choice for enjoying impressive detail and clarity.
Available in active (with integrated amplifier) or passive version.
Available colors 
ACTIVE VERSION
PASSIVE VERSION
ACTIVE VERSION
SIDE WALL SPEAKER – ACTIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Standalone speaker with integrated amplifier
Wirelessly compatible with all Orchestra subwoofers
► Technical characteristics
| Speakers | 1 x 30 mm (1’’) horn tweeter · 1 x 165 mm (6.5’’) woofer |
| Power (RMS) | 2 x 90 W |
| Power supply | 220–240 V and 100–120 V |
| modes | 3 preset settings : Hifi, Home Theater, Power |
| Frequency response (+/− 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Entries | HDMI (ARC) / Optique / Bluetooth / Ligne (RCA) |
| Subwoofer Outputs | RCA or Wireless |
| Standby consumption | < 0,5 W |
| Auto sleep | Auto wakes up after 30 minutes without playback |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 6.5 kg |
3 PRESET SETTINGS
Hi-fi mode
This listening prioritizes neutrality and respect for timbres. DSP digital processing is not used in favor of passive filtering. Thus, we maintain the tonal balance of the product for a demanding hi-fi approach.
Mode Home Theatre
This mode was developed to provide you with the ideal cinematic sound experience. The focus here is on the low-frequency range, while highlighting dialogue and spatial effects. In addition, the stereo image is expanded using high-performance digital processing to maximize immersion.
Mode Power
If you want to play louder with your speakers, this mode is ideal! By applying a 70Hz bass cutoff frequency, the amplification is less stressed in favor of a higher overall gain. This dynamic listening is ideally accompanied by the addition of wireless subwoofers for powerful bass.
CONNECTORS
TECHNICAL SHEET
PASSIVE VERSION
DOUBLE SIDE ON WALL SPEAKER – PASSIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Can be used as a main speaker or effects speaker
► Technical characteristics
| Speakers: 1 x 30 mm (1″) horn tweeter | 1 x 165 mm (6.5″) woofer |
| Maximum admissible power | 100 W |
| Recommended amplifier output power | 50 – 100 W |
| Frequency response (+/- 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Inputs | Push terminal block |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 5,5 kg |
TECHNICAL SHEET
a simple connection
In their active version, these speakers integrate Class D amplification modules, designed around quality components. They connect directly to any source (TV, telephone, computer, etc.) and only require a simple mains power supply. Thanks to their complete connectivity (wireless, HDMI, optical or analog) you can manage all your sources on a single device. It is also possible to configure your system in wireless connection, with Sub Connect, whether to reinforce the impact of the bass or adapt your installation to the acoustics of your space.
our BLAM speakers
Our speaker design is based on a philosophy of neutrality and power, particularly in the mid-range frequency band. The objective is to study the speakers in order to obtain the most linear frequency response possible, with the aim of reproducing the most natural sound possible, without coloration. This natural linearity allows the use of simple filters with gentle attenuation slopes promoting a perfect fusion between the speakers. Each speaker has been developed to operate ideally in the volume of the speakers it integrates. The combination of generous motors with large diameter voice coils results in a high power handling of our products.
Thanks to their multiple attachment points, you can install them both vertically and horizontally.
ACTIVE VERSION
PASSIVE VERSION
ACTIVE VERSION
SIDE WALL SPEAKER – ACTIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Standalone speaker with integrated amplifier
Wirelessly compatible with all Orchestra subwoofers
► Technical characteristics
| Speakers | 1 x 30 mm (1’’) horn tweeter · 1 x 165 mm (6.5’’) woofer |
| Power (RMS) | 2 x 90 W |
| Power supply | 220–240 V and 100–120 V |
| modes | 3 preset settings : Hifi, Home Theater, Power |
| Frequency response (+/− 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Entries | HDMI (ARC) / Optique / Bluetooth / Ligne (RCA) |
| Subwoofer Outputs | RCA or Wireless |
| Standby consumption | < 0,5 W |
| Auto sleep | Auto wakes up after 30 minutes without playback |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 6.5 kg |
3 PRESET SETTINGS
Hi-fi mode
This listening prioritizes neutrality and respect for timbres. DSP digital processing is not used in favor of passive filtering. Thus, we maintain the tonal balance of the product for a demanding hi-fi approach.
Mode Home Theatre
This mode was developed to provide you with the ideal cinematic sound experience. The focus here is on the low-frequency range, while highlighting dialogue and spatial effects. In addition, the stereo image is expanded using high-performance digital processing to maximize immersion.
Mode Power
If you want to play louder with your speakers, this mode is ideal! By applying a 70Hz bass cutoff frequency, the amplification is less stressed in favor of a higher overall gain. This dynamic listening is ideally accompanied by the addition of wireless subwoofers for powerful bass.
CONNECTORS
TECHNICAL SHEET
PASSIVE VERSION
DOUBLE SIDE ON WALL SPEAKER – PASSIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Can be used as a main speaker or effects speaker
► Technical characteristics
| Speakers: 1 x 30 mm (1″) horn tweeter | 1 x 165 mm (6.5″) woofer |
| Maximum admissible power | 100 W |
| Recommended amplifier output power | 50 – 100 W |
| Frequency response (+/- 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Inputs | Push terminal block |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 5,5 kg |
TECHNICAL SHEET
our BLAM speakers
Our speaker design is based on a philosophy of neutrality and power, particularly in the mid-range frequency band. The objective is to study the speakers in order to obtain the most linear frequency response possible, with the aim of reproducing the most natural sound possible, without coloration. This natural linearity allows the use of simple filters with gentle attenuation slopes promoting a perfect fusion between the speakers. Each speaker has been developed to operate ideally in the volume of the speakers it integrates. The combination of generous motors with large diameter voice coils results in a high power handling of our products.
a simple connection
In their active version, these speakers integrate Class D amplification modules, designed around quality components. They connect directly to any source (TV, telephone, computer, etc.) and only require a simple mains power supply. Thanks to their complete connectivity (wireless, HDMI, optical or analog) you can manage all your sources on a single device. It is also possible to configure your system in wireless connection, with Sub Connect, whether to reinforce the impact of the bass or adapt your installation to the acoustics of your space.
Thanks to their multiple attachment points, you can install them both vertically and horizontally.
Looking for Blam audio products?
Find our resellers and distributors
around the world.
ACTIVE VERSION
PASSIVE VERSION
ACTIVE VERSION
SIDE WALL SPEAKER – ACTIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Standalone speaker with integrated amplifier
Wirelessly compatible with all Orchestra subwoofers
► Technical characteristics
| Speakers | 1 x 30 mm (1’’) horn tweeter · 1 x 165 mm (6.5’’) woofer |
| Power (RMS) | 2 x 90 W |
| Power supply | 220–240 V and 100–120 V |
| modes | 3 preset settings : Hifi, Home Theater, Power |
| Frequency response (+/− 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Entries | HDMI (ARC) / Optique / Bluetooth / Ligne (RCA) |
| Subwoofer Outputs | RCA or Wireless |
| Standby consumption | < 0,5 W |
| Auto sleep | Auto wakes up after 30 minutes without playback |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 6.5 kg |
3 PRESET SETTINGS
Hi-fi mode
This listening prioritizes neutrality and respect for timbres. DSP digital processing is not used in favor of passive filtering. Thus, we maintain the tonal balance of the product for a demanding hi-fi approach.
Mode Home Theatre
This mode was developed to provide you with the ideal cinematic sound experience. The focus here is on the low-frequency range, while highlighting dialogue and spatial effects. In addition, the stereo image is expanded using high-performance digital processing to maximize immersion.
Mode Power
If you want to play louder with your speakers, this mode is ideal! By applying a 70Hz bass cutoff frequency, the amplification is less stressed in favor of a higher overall gain. This dynamic listening is ideally accompanied by the addition of wireless subwoofers for powerful bass.
CONNECTORS
TECHNICAL SHEET
PASSIVE VERSION
DOUBLE SIDE ON WALL SPEAKER – PASSIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Can be used as a main speaker or effects speaker
► Technical characteristics
| Speakers: 1 x 30 mm (1″) horn tweeter | 1 x 165 mm (6.5″) woofer |
| Maximum admissible power | 100 W |
| Recommended amplifier output power | 50 – 100 W |
| Frequency response (+/- 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Inputs | Push terminal block |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 5,5 kg |
TECHNICAL SHEET
a simple connection
In their active version, these speakers integrate Class D amplification modules, designed around quality components. They connect directly to any source (TV, telephone, computer, etc.) and only require a simple mains power supply. Thanks to their complete connectivity (wireless, HDMI, optical or analog) you can manage all your sources on a single device. It is also possible to configure your system in wireless connection, with Sub Connect, whether to reinforce the impact of the bass or adapt your installation to the acoustics of your space.
our BLAM speakers
Our speaker design is based on a philosophy of neutrality and power, particularly in the mid-range frequency band. The objective is to study the speakers in order to obtain the most linear frequency response possible, with the aim of reproducing the most natural sound possible, without coloration. This natural linearity allows the use of simple filters with gentle attenuation slopes promoting a perfect fusion between the speakers. Each speaker has been developed to operate ideally in the volume of the speakers it integrates. The combination of generous motors with large diameter voice coils results in a high power handling of our products.
Thanks to their multiple attachment points, you can install them both vertically and horizontally.
ACTIVE VERSION
PASSIVE VERSION
ACTIVE VERSION
SIDE WALL SPEAKER – ACTIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Standalone speaker with integrated amplifier
Wirelessly compatible with all Orchestra subwoofers
► Technical characteristics
| Speakers | 1 x 30 mm (1’’) horn tweeter · 1 x 165 mm (6.5’’) woofer |
| Power (RMS) | 2 x 90 W |
| Power supply | 220–240 V and 100–120 V |
| modes | 3 preset settings : Hifi, Home Theater, Power |
| Frequency response (+/− 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Entries | HDMI (ARC) / Optique / Bluetooth / Ligne (RCA) |
| Subwoofer Outputs | RCA or Wireless |
| Standby consumption | < 0,5 W |
| Auto sleep | Auto wakes up after 30 minutes without playback |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 6.5 kg |
3 PRESET SETTINGS
Hi-fi mode
This listening prioritizes neutrality and respect for timbres. DSP digital processing is not used in favor of passive filtering. Thus, we maintain the tonal balance of the product for a demanding hi-fi approach.
Mode Home Theatre
This mode was developed to provide you with the ideal cinematic sound experience. The focus here is on the low-frequency range, while highlighting dialogue and spatial effects. In addition, the stereo image is expanded using high-performance digital processing to maximize immersion.
Mode Power
If you want to play louder with your speakers, this mode is ideal! By applying a 70Hz bass cutoff frequency, the amplification is less stressed in favor of a higher overall gain. This dynamic listening is ideally accompanied by the addition of wireless subwoofers for powerful bass.
CONNECTORS
TECHNICAL SHEET
PASSIVE VERSION
DOUBLE SIDE ON WALL SPEAKER – PASSIVE VERSION
High performance basalt composite membrane
Easy integration even in small interiors
Can be used as a main speaker or effects speaker
► Technical characteristics
| Speakers: 1 x 30 mm (1″) horn tweeter | 1 x 165 mm (6.5″) woofer |
| Maximum admissible power | 100 W |
| Recommended amplifier output power | 50 – 100 W |
| Frequency response (+/- 3 dB) | 60 Hz – 25 kHz |
| Load type | Closed enclosure |
| Sensitivity | 88 dB/W/m |
| nominal impedance | 4 Ohms |
| Inputs | Push terminal block |
| Dimensions (with tissue holder) | 500 x 300 x 105 mm |
| Weight | 5,5 kg |
TECHNICAL SHEET
our BLAM speakers
Our speaker design is based on a philosophy of neutrality and power, particularly in the mid-range frequency band. The objective is to study the speakers in order to obtain the most linear frequency response possible, with the aim of reproducing the most natural sound possible, without coloration. This natural linearity allows the use of simple filters with gentle attenuation slopes promoting a perfect fusion between the speakers. Each speaker has been developed to operate ideally in the volume of the speakers it integrates. The combination of generous motors with large diameter voice coils results in a high power handling of our products.
a simple connection
In their active version, these speakers integrate Class D amplification modules, designed around quality components. They connect directly to any source (TV, telephone, computer, etc.) and only require a simple mains power supply. Thanks to their complete connectivity (wireless, HDMI, optical or analog) you can manage all your sources on a single device. It is also possible to configure your system in wireless connection, with Sub Connect, whether to reinforce the impact of the bass or adapt your installation to the acoustics of your space.
Thanks to their multiple attachment points, you can install them both vertically and horizontally.
You will like also :
-
BM 100S
Relax -
Kit S 165N45+
Signature
