Subwoofer Deep 15
The Deep 15 is a high-performance active subwoofer designed for extremely deep and powerful bass. It features a 15″ (38 cm) subwoofer and delivers up to 2000 W, with bass extension down to 22 Hz for ultra-immersive sound reproduction, even at low volumes. Thanks to its down-firing configuration, it projects bass frequencies towards the floor for more even distribution throughout the room and an enhanced sense of immersion. The integrated low-pass filter minimizes distortion and improves bass accuracy.
● 38 cm (15″) active subwoofer – 2000 W max
● Frequency response: up to 22 Hz
● Stackable configuration for more power
● Down-firing diffusion towards the ground
● Deep, immersive, and controlled bass
⌾ More than a sound, a sensation.
♫ In-store listening
✔ Expertise developed since 2013
✔ Immersion thanks to the French Sound
ACTIVE SUBWOOFER
38 cm (15″) basalt composite subwoofer
Ultra-powerful Class D amplifier
Stackable system
Wirelessly compatible with all Orchestra subwoofers
Subwoofer 380 mm (15″)Bass reflex with downward diffusion
| Characteristic | Value |
|---|---|
| Power (RMS) | 1000 W |
| Power supply | 220–240 V and 100–120 V |
| modes | 3 preset settings : Hifi, Home Theater, Power |
| Speakers | |
| Frequency response (± 3 dB) | 22 Hz – 200 Hz |
| Load type | |
| Sensitivity | 88 dB/W/m |
| Inputs | RCA or BT |
| Standby power consumption | 0.5 W |
| Automatic sleep | After 30 minutes of non-playback, automatic wake-up |
| Dimensions (with fabric holder) | 500 × 500 × 555 mm |
| Weight | 45.5 kg |
3 PRESET SETTINGS
Hi-fi mode
This listening favors neutrality and respect for timbres. DSP digital processing is not used in favor of passive filtering. Thus, we maintain the tonal balance of the product for a demanding hi-fi approach.
Mode Home Theatre
This mode was developed to provide you with the ideal cinematic sound experience. The focus here is on the low-frequency range, while highlighting dialogue and spatial effects. In addition, the stereo image is expanded using high-performance digital processing to maximize immersion.
Mode Power
If you want to use your speakers to play at high volume, this mode is ideal! By applying a cutoff frequency in the bass at 70Hz, the amplification is less requested for the benefit of a higher general gain. This dynamic listening is ideally accompanied by the addition wireless subwoofers for powerful bass.
CONNECTORS
Downloads
a simple connection
In their active version, these speakers integrate Class D amplification modules, designed around quality components. They connect directly to any source (TV, telephone, computer, etc.) and only require a simple mains power supply. Thanks to their complete connectivity (wireless, HDMI, optical or analog) you can manage all your sources on a single device. It is also possible to configure your system in wireless connection, with Sub Connect, whether to reinforce the impact of the bass or adapt your installation to the acoustics of your space.
our BLAM speakers
Our speaker design is based on a philosophy of neutrality and power, particularly in the mid-range frequency band. The objective is to study the speakers in order to obtain the most linear frequency response possible, with the aim of reproducing the most natural sound possible, without coloration. This natural linearity allows the use of simple filters with gentle attenuation slopes promoting a perfect fusion between the speakers. Each speaker has been developed to operate ideally in the volume of the speakers it integrates. The combination of generous motors with large diameter voice coils results in a high power handling of our products.
3 PRESET SETTINGS
Hi-fi mode
This listening favors neutrality and respect for timbres. DSP digital processing is not used in favor of passive filtering. Thus, we maintain the tonal balance of the product for a demanding hi-fi approach.
Mode Home Theatre
This mode was developed to provide you with the ideal cinematic sound experience. The focus here is on the low-frequency range, while highlighting dialogue and spatial effects. In addition, the stereo image is expanded using high-performance digital processing to maximize immersion.
Mode Power
If you want to use your speakers to play at high volume, this mode is ideal! By applying a cutoff frequency in the bass at 70Hz, the amplification is less requested for the benefit of a higher general gain. This dynamic listening is ideally accompanied by the addition wireless subwoofers for powerful bass.
CONNECTORS
Downloads
our BLAM speakers
Our speaker design is based on a philosophy of neutrality and power, particularly in the mid-range frequency band. The objective is to study the speakers in order to obtain the most linear frequency response possible, with the aim of reproducing the most natural sound possible, without coloration. This natural linearity allows the use of simple filters with gentle attenuation slopes promoting a perfect fusion between the speakers. Each speaker has been developed to operate ideally in the volume of the speakers it integrates. The combination of generous motors with large diameter voice coils results in a high power handling of our products.
a simple connection
In their active version, these speakers integrate Class D amplification modules, designed around quality components. They connect directly to any source (TV, telephone, computer, etc.) and only require a simple mains power supply. Thanks to their complete connectivity (wireless, HDMI, optical or analog) you can manage all your sources on a single device. It is also possible to configure your system in wireless connection, with Sub Connect, whether to reinforce the impact of the bass or adapt your installation to the acoustics of your space.
| CATEGORIE | Passive, Subwoofer |
|---|---|
| COULEUR | |
| PLACEMENT | Floorstanding |
